Badr N.N.; Long F.; Luo Y.; Topping M.; Béland L.K.; Yao Z.; Balogh L.; Daymond M.R. (2023). On potential core-shell morphologies of δ-hydride precipitates in zircaloy-2: A microstructural characterization approach by electron diffraction and energy-loss spectroscopy
Acta Materialia, 257.
Sun H.; Béland L.K. (2023). Calculation of the recombination radii between various point defects and defect clusters in nickel via kinetic Activation Relaxation Technique
Journal of Nuclear Materials, 586.
Shepertycky M.; Liu Y.-F.; Li Q. (2023). A transition point: Assistance magnitude is a critical parameter when providing assistance during walking with an energy-removing exoskeleton or biomechanical energy harvester
PLoS ONE, 18(8-Aug).
Nielsen A.S.; Peppley B.A.; Burheim O.S. (2023). Reverse Water Gas Shift versus Carbon Dioxide Electro-Reduction: The Reaction Pathway Responsible for Carbon Monoxide Production in Solid Oxide Co-Electrolysis Cells
Energies, 16(15).
Jandaghi M.R.; Pouraliakbar H.; Iannucci L.; Fallah V.; Pavese M. (2023). Comparative assessment of gas and water atomized powders for additive manufacturing of 316 L stainless steel: Microstructure, mechanical properties, and corrosion resistance
Materials Characterization, 204.
Zhang Y.; Opletal G.; Briggs S.; Binns W.J.; Béland L.K. (2023). Mechanical properties and pore network connectivity of sodium montmorillonite as predicted by a coarse-grained molecular model
Applied Clay Science, 243.
Kaiser F.; Rival D.E. (2023). Large-scale volumetric particle tracking using a single camera: analysis of the scalability and accuracy of glare-point particle tracking
Experiments in Fluids, 64(9).
Crane J.; Dinh C.-T. (2023). Moving beyond two-carbon products
Nature Energy.
He X.; Zhou X.; Li J.; Mechefske C.K.; Wang R.; Yao G.; Liu Q. (2023). Adaptive feature mode decomposition: a fault-oriented vibration signal decomposition method for identification of multiple localized faults in rotating machinery
Nonlinear Dynamics.
Bradach M.M.; Gaudette L.W.; Tenforde A.S.; Outerleys J.; de Souza Júnior J.R.; Johnson C.D. (2023). The Effects of a Simple Sensor Reorientation Procedure on Peak Tibial Accelerations during Running and Correlations with Ground Reaction Forces
Sensors, 23(13).
Burnham SPL, Finak P, Henderson JT, Gaurav N, Batorowicz B, Pinder SD, Davies TC (2023). Models and frameworks for guiding assessment for aided Augmentative and Alternative communication (AAC): a scoping review.
Disabil Rehabil Assist Technol..
Quinn Yetman, Anton Arndt & Michael Rainbow (2023). Insights into the energy returning properties of ‘super shoes’ from a novel, highly accurate, biplanar videoradiography dataset
Footwear Science.
Moore B., Topping M., Guo R., Feuerstake T., McDonald C., Daymond M.R. (2023). The design and implementation of an in-situ mechanical loading apparatus used during proton-irradiations
Journal of Nuclear Materials, 583.
Huang Y., Morris Z., Sirola T., Hardman A., Shi Y., Kim I.Y., Pamwar M., Sangha B. (2023). Frequency-Constrained Multi-Material Topology Optimization: Commercial Solver Integrable Sensitivities
SAE Technical Papers.
Baum S.; Stengel P.; Abe N.; Acevedo J.F.; Araujo G.R.; Asahara Y.; Avignone F.; Balogh L.; Baudis L.; Boukhtouchen Y.; Bramante J.; Breur P.A.; Caccianiga L.; Capozzi F.; Collar J.I.; Ebadi R.; Edwards T.; Eitel K.; Elykov A.; Ewing R.C.; Freese K.; Fung (2023). Mineral detection of neutrinos and dark matter. A whitepaper
Physics of the Dark Universe, 41.
Gholamzadeh H.; Shaik A.; Daub K.; Topping M.; Daymond M.R.; Persaud S.Y. (2023). A mechanistic study on dealloying-induced stress corrosion cracking of Alloy 800 in boiling caustic solutions
Corrosion Science, 220.
Best A.N.; Wu A.R. (2023). Modified stepping behaviour during outdoor winter walking increases resistance to forward losses of stability
Scientific Reports, 13(1).
Diak B.J.; Miskovic M.; Zurba N.; Beaumont D. (2023). Not all screens are created equal: examination of surface features and other physical properties of commonly used screen materials for smoking drugs
Harm Reduction Journal, 20(1).
Eveleigh KJ, Deluzio KJ, Scott SH, Laende EK (2023). Principal component analysis of whole-body kinematics using markerless motion capture during static balance tasks
J Biomech., 152.
Li J.; Yao Z.; Zhang X.; Wang Z.; Liu L.; Yang X.; Zhang J.; Niu S.; Han Z.; Ren L. (2023). Bionic multifunctional ultra-linear strain sensor, achieving underwater motion monitoring and weather condition monitoring
Chemical Engineering Journal, 464.
Lackey S, Watson Hyatt G, Batorowicz B, van Engelen S, Li S, Pinder S, Davies TC (2023). Barriers and facilitators to accommodations in the workplace for adults who use augmentative and alternative communication (AAC): a systematic review.
Augment Altern Commun(28), p.1-17.
Wang P., Rabori A.S., Dong Q., Ravkov L., Balogh L., Fallah V. (2023). The role of cellular structure, non-equilibrium eutectic phases and precipitates on quasi-static strengthening mechanisms of as-built AlSi10Mg parts 3D printed via laser powder bed fusion
Materials Characterization, 198.
Balogh L., Beaufort C., Brossard A., Caron J.-F., Chapellier M., Coquillat J.-M., Corcoran E.C., Crawford S., Dastgheibi-Fard A., Deng Y., Dering K., Durnford D., Garrah C., Gerbier G., Giomataris I., Giroux G., Gorel P., Gros M., Gros P., Guillaudin O., Hoppe E.W., Katsioulas I., Kelly F., Knights P., Langrock S., Lautridou P., Manthos I., Martin R.D., Matthews J., Mols J.-P., Muraz J.F., Neep T., Nikolopoulos K., O'Brien P., Piro M.C., Rowe N., Santos D., Samuleev P., Savvidis G., Savvidis I., Vazquez de Sola Fernandez F., Vidal M., Ward R., Zampaolo M., NEWS-G collaboration (2023). The NEWS-G detector at SNOLAB
Journal of Instrumentation, 18(2).
Karaca A., Glüsen A., Wippermann K., Mauger S., Yang-Neyerlin A.C., Woderich S., Gimmler C., Müller M., Bender G., Weller H., Carmo M., Stolten D. (2023). Oxygen Reduction at PtNi Alloys in Direct Methanol Fuel Cells—Electrode Development and Characterization
Energies, 16(3).
Badr N.N., Long F., Lou Y., Topping M., Béland L.K., Yao Z., Daymond M.R. (2023). On the trigonal structure of the ζ-hydride in zirconium: A microstructural characterization approach by electron diffraction and energy-loss spectroscopy
Acta Materialia, 247.
Griffiths M. (2023). X-ray diffraction line broadening and radiation damage
Materialia, 27.
Salandari-Rabori A., Fallah V. (2023). Heterogeneity of deformation, shear band formation and work hardening behavior of as-printed AlSi10Mg via laser powder bed fusion
Materials Science and Engineering A, 866.
Hantsis Z., Piomelli U. (2022). Effects of roughness on the turbulent Prandtl number, timescale ratio, and dissipation of a passive scalar
Physical Review Fluids, 7(12).
von Hahn T., Mechefske C.K. (2022). Machine Learning in CNC Machining: Best Practices
Machines, 10(12).
Saimoto S., Diak B.J., Niewczas M. (2022). Rate-Controlling Microplastic Processes during Plastic Flow in FCC Metals: Origin of the Variation of Strain Rate Sensitivity in Aluminum from 78 to 300 K
Crystals, 12(12).
Li J., Yao Z., Meng X., Zhang C., Sun T., Song W., Li H., Zhang J., Niu S., Liu L., Han Z., Ren L. (2022). Paper-Based Sensor with Bioinspired Macrogrooves for Dual Pressure and Mechanical Strain Signal Detection
ACS Applied Nano Materials, 5(12), p.18832-18841.
Soukup JW, Jeffery J, Hetzel SJ, Ploeg HL, Henak CR. (2022). Morphological quantification of the maxillary canine tooth in the domestic dog (Canis lupus familiaris).
Ann Anat..
Saimoto S., Diak B.J., Kula A., Niewczas M. (2023). Assimilated model of work-hardening in FCC metals and its application to devolution of stored work
Materials Today Communications, 34.
Park S., Utsch N., Carmo M., Shviro M., Stolten D. (2022). Iridium-Nickel Nanoparticle-Based Aerogels for Oxygen Evolution Reaction
ACS Applied Nano Materials.
Zheng S., Li Q., Liu T. (2022). Multi-phase optimisation model predicts manual lifting motions with less reliance on experiment-based posture data
Ergonomics.
Zheng S, Li Q, Liu T (2022). Multi-phase optimization model predicts manual lifting motions with less reliance on experiment-based posture data.
Ergonomics, 18, p.1-28.
Torkan, L. F., Bryant, J. T., Bicknell, R. T., and Ploeg, H. (2022). Accuracy of an Apparatus for Measuring Glenoid Baseplate Micromotion in Reverse Shoulder Arthroplasty.
ASME. J. Med. Devices, 16(4).
Griffiths M., Xu S., Ramos Nervi J.E. (2022). Swelling and He-Embrittlement of Austenitic Stainless Steels and Ni-Alloys in Nuclear Reactors
Metals, 12(10).
Campigotto A, Campbell RJ, Lai Y. (2022). Correlation between corneal and contact lens deformation with changes in intraocular pressure for wearable monitoring systems.
Eye (Lond).
Jandaghi M.R., Pouraliakbar H., Shim S.H., Fallah V., Hong S.I., Pavese M. (2022). In-situ alloying of stainless steel 316L by co-inoculation of Ti and Mn using LPBF additive manufacturing: Microstructural evolution and mechanical properties
Materials Science and Engineering A, 857.
Chu M., Wu X., Rival D.E. (2022). Quantification of Reynolds-averaged-Navier-Stokes model-form uncertainty in transitional boundary layer and airfoil flows
Physics of Fluids, 34(10).
M. Shepertycky, Y. -F. Liu and Q. Li (2022). Design and Evaluation of a Load Control System for Biomechanical Energy Harvesters and Energy-Removing Exoskeletons
IEEE/ASME Transactions on Mechatronics.
Barati Rizi M.H., Ghiasabadi Farahani M., Aghaahmadi M., Kim J.H., Karjalainen L.P., Sahu P. (2022). Analysis of strain hardening behavior of a high-Mn TWIP steel using electron microscopy and cyclic stress relaxation
Acta Materialia, 240.
Nielsen A.S., Peppley B.A., Burheim O.S. (2023). Tuning transport mechanisms in fuel-assisted solid oxide electrolysis cells for enhanced performance and product selectivity: Thermodynamic and kinetic modeling
Chemical Engineering Journal, 452.
Long F., Goldthorpe S., Daymond M.R. (2022). Effect of metallurgical variables on hydride precipitation behavior in Zr-2.5Nb micro pressure tubes
Journal of Nuclear Materials, 571.
Hou X., Wang H., Yang Q., Chen Y., Chai L., Song B., Guo N., Guo S., Yao Z. (2022). Microstructure and properties of Cr-AlN composite coating prepared by pack-cementation on the surface of Al-containing ODS steel
Surface and Coatings Technology, 447.
Hou X., Wang H., Yang Q., Chen Y., Chai L., Song B., Guo N., Guo S., Yao Z. (2022). Microstructure and properties of Cr-AlN composite coating prepared by pack-cementation on the surface of Al-containing ODS steel
Surface and Coatings Technology, 447.
Samie, M., Aparece-Scutariu, V., Lavoie, P., Shin, D., & Pollard, A (2022). Three-dimensional large-scale and very-large-scale coherent structures in a turbulent axisymmetric jet
Journal of Fluid Mechanics, 948(0).
Dossett W., Krsikapa D., Jalayer S., Lee Y.M., Ko K.U., Huh M.Y., Choi B.H., Ku J.W., Lee K.C., Kim I.Y. (2022). Exploring New Joining Techniques of CFRP Cross Member Chassis
SAE Technical Papers.
Kamkar M., Salehiyan R., Goudoulas T.B., Abbasi M., Saengow C., Erfanian E., Sadeghi S., Natale G., Rogers S.A., Giacomin A.J., Sundararaj U. (2022). Large amplitude oscillatory shear flow: Microstructural assessment of polymeric systems
Progress in Polymer Science, 132.
Noyek S., Davies C., Champagne M., Batorowicz B., Fayed N. (2022). Emotional Well-Being of Children and Youth with Severe Motor and Communication Impairment: A Conceptual Understanding
Developmental Neurorehabilitation.
Crispo L., Krsikapa D., Chai K., Young M., Kim I.Y. (2022). Multi-Material Topology Optimization for the Conceptual Design of an Additively Manufactured Aerospace Smart Table
AIAA AVIATION 2022 Forum.
Keller V.T., Outerleys J.B., Kanko R.M., Laende E.K., Deluzio K.J. (2022). Clothing condition does not affect meaningful clinical interpretation in markerless motion capture
Journal of Biomechanics, 141.
Nie C., Shao Y., Mechefske C.K., Peng D., Yang X. (2022). Pipe architecture optimization of the parallel Hydraulic-pneumatic hybrid system using a hydraulic transformer
Energy Conversion and Management, 266.
Pan C., Wang X., Sun H., Zhu X., Zhao J., Fan H., Liu Y. (2022). Large-eddy simulation and experimental study on effects of single-dual sparks positions on vented explosions in a channel
Fuel, 322.
Torkan L.F., Bryant J.T., Bicknell R.T., Ploeg H.-L. (2022). Central fixation element type and length affect glenoid baseplate micromotion in reverse shoulder arthroplasty
Journal of Shoulder and Elbow Surgery.
Karacan C., Lohmann-Richters F.P., Shviro M., Keeley G.P., Müller M., Carmo M., Stolten D. (2022). Fabrication of High Performing and Durable Nickel-Based Catalyst Coated Diaphragms for Alkaline Water Electrolyzers
Journal of the Electrochemical Society, 169(5).
Z. Chen, W. Yu, X. Ding, Y. Shao and C. K. Mechefske (2022). Pair-wise Orthogonal Classifier Based Domain Adaptation Network for Fault Diagnosis in Rotating Machinery
IEEE Sensors Journal.
Sun H., Béland L.K. (2022). Statistical distribution of spontaneous recombination radii of Frenkel pairs in FCC and BCC metals
Acta Materialia, 229.
Nielsen A.S., Ostadi M., Austbø B., Hillestad M., del Alamo G., Burheim O. (2022). Enhancing the efficiency of power- and biomass-to-liquid fuel processes using fuel-assisted solid oxide electrolysis cells
Fuel, 321.
Deng L., Wang C., Luo J., Tu J., Guo N., Xu H., He P., Xia S., Yao Z. (2022). Preparation and property optimization of FeCrAl-based ODS alloy by machine learning combined with wedge-shaped hot-rolling
Materials Characterization, 188.
Kamath A., Tamm A., Long F., Griffiths M., Daymond M.R., Béland L.K. (2022). Characterization of Zr-Nb-Fe(-Cr) precipitates in Zr-based alloys using density functional theory
Materials Today Communications, 31.
Wang J., Liu L., Yang C., Zhang C., Li B., Meng X., Ma G., Wang D., Zhang J., Niu S., Zhao J., Han Z., Yao Z., Ren L. (2022). Ultrasensitive, Highly Stable, and Flexible Strain Sensor Inspired by Nature
ACS Applied Materials and Interfaces, 14(14), p. 16885-16893.
Shah, V; Pamwar, M; Sangha, B; Kim, IY (2022). Multi-material topology optimization considering natural frequency constraint
ENGINEERING COMPUTATIONS.
Ghaznavi, T; Bryk, MA; Persaud, SY; Newman, RC (2022). Alloying effects in high temperature molten salt corrosion
CORROSION SCIENCE, 197.
Guo, MN; Daub, K; Dong, QS; Long, F; Binns, WJ; Daymond, MR; Shoesmith, DW; Noel, JJ; Persaud, SY (2022). The Early-Stage Corrosion of Copper Materials in Chloride and Sulfide Solutions: Nanoscale Characterization and The Effect of Microstructure
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 169(3).
Bonar S.; Burnham S.; Henderson J.; Batorowicz B.; Pinder S.D.; Shepherd T.; Davies T.C. (2023). Canadian manufacturer and technician perspectives on the design and use of augmentative and alternative communication technology
Disability and Rehabilitation: Assistive Technology.
Ashall M, Wheatley MGA, Saliba C, Deluzio KJ, Rainbow MJ (2023). Prediction of Model Generated Patellofemoral Joint Contact Forces Using Principal Component Prediction and Reconstruction.
J Appl Biomech..
Behling AV, Rainbow MJ, Welte L, Kelly L. (2023). Chasing footprints in time - reframing our understanding of human foot function in the context of current evidence and emerging insights.
Biol Rev Camb Philos Soc.
Yilma TM, Mekonone ST, Alene BM, Kibret AK, Alemayehu Z, Addis BM, Menna DW, Davies TC. (2023). Assistive technology use and its associated factors among university students with disabilities: a case study in a developing country-mixed study design.
Disabil Rehabil Assist Technol..
Anja-Verena Behling, Michael Rainbow, Lauren Welte & Luke Kelly (2023). Talus shape predicts subtalar running kinematics in minimalist shoes
Footwear Science.
Sirola T., Hardman A., Morris Z., Huang Y., Shi Y., Kim I.Y., Pamwar M., Sangha B. (2023). Multi-Joint Topology Optimization: An Effective Approach for Practical Multi-Material Design Problems
SAE Technical Papers.
Hardman A., Sirola T., Huang Y., Morris Z., Shi Y., Kim I.Y., Pamwar M., Sangha B. (2023). Multi-Material Topology Optimization Considering Crashworthiness
SAE Technical Papers.
Ciccarelli G. (2023). Selected topics from the 28th International Colloquium on the Dynamics of Explosions and Reactive Systems, Naples, Italy, June 19–24, 2022
Shock Waves.
Welte L, Holowka NB, Kelly LA, Arndt A, Rainbow MJ (2023). Mobility of the human foot's medial arch helps enable upright bipedal locomotion.
Front Bioeng Biotechnol..
Changizian P., Yao Z., Xu S., Daymond M.R., Griffiths M. (2023). Mechanical behavior of recrystallized and precipitation-hardened Inconel X-750 before and after helium-implantation and proton irradiation
Materials Characterization, 202.
Shi L.-F., Zahid A., Ren A., Ali M.Z., Yue H., Imran M.A., Shi Y., Abbasi Q.H. (2023). The perspectives and trends of THz technology in material research for future communication - a comprehensive review
Physica Scripta, 98(6).
Beygi R., Galvão I., Akhavan-Safar A., Pouraliakbar H., Fallah V., da Silva L.F.M. (2023). Effect of Alloying Elements on Intermetallic Formation during Friction Stir Welding of Dissimilar Metals: A Critical Review on Aluminum/Steel
Metals, 13(4).
Shim S.H., Pouraliakbar H., Minouei H., Rizi M.S., Fallah V., Na Y.-S., Han J.H., Hong S.I. (2023). Characterization of the microscale/nanoscale hierarchical microstructure of an as-cast CrMnFeNiCu high-entropy alloy with promising mechanical properties
Journal of Alloys and Compounds, 954.
Ghaffari Y., Daub K., Long F., Topping M., Persaud S.Y. (2023). Comparing the intergranular oxidation of Ni-Cr and Ni-Al model alloys in 480 °C hydrogenated steam
Scripta Materialia, 232.
McLoughlin M., Yousefi-Asli V., Gray S., Ciccarelli G. (2023). Detonation propagation through a diffuse-interface gas layer
Shock Waves.
Forward C.; Kim I.Y. (2023). Layered fiber orientation optimization for continuous fiber reinforced polymer additive manufacturing using multi-material topology optimization
Progress in Additive Manufacturing.
Changizian P.; Yao Z.; Long F.; Topping M.; Xu S.X.; Daymond M.R.; Griffiths M. (2023). Mechanical behavior of cold-worked, precipitation-hardened Inconel X-750 before and after helium-implantation
Materials Characterization, 199.
Salandari-Rabori A.; Zarei-Hanzaki A.; Asqardoust S.; Abedi H.R.; Krajňák T.; Minárik P.; Veselý J. (2023). Novel RE-texture component and bimodal microstructure formation during post-annealing of an accumulative back extruded WE43 alloy
Materials Letters, 337.
Persaud S.Y., Binns W.J., Guo M., Williams D., Dong Q., Arcuri G.A., Daub K., Newman R.C., Daymond M.R., Keech P.G. (2023). Applying state-of-the-art microscopy techniques to understand the degradation of copper for nuclear waste canisters
Materials and Corrosion.
Amiri P., Davis E.M., Outerleys J., Miller R.H., Brandon S., Astephen Wilson J.L. (2023). High tibiofemoral contact and muscle forces during gait are associated with radiographic knee OA progression over 3 years
Knee, 41, p.245-256.
Griffiths M. (2023). X-ray diffraction line broadening and radiation damage
Materialia, 27.
Salomone T., Piomelli U., De Stefano G. (2023). Wall-Modeled and Hybrid Large-Eddy Simulations of the Flow over Roughness Strips
Fluids, 8(1).
Soukup JW, Jeffery J, Drizin SR, Hetzel SJ, Stone DS, Eriten M, Ploeg HL, Henak CR. (2023). Correlation of mineral density and elastic modulus of dog dentin using μ-CT and nanoindentation.
J Biomech, 147.
Balogh L., Beaufort C., Brossard A., Caron J.-F., Chapellier M., Coquillat J.-M., Corcoran E.C., Crawford S., Dastgheibi-Fard A., Deng Y., Dering K., Durnford D., Garrah C., Gerbier G., Giomataris I., Giroux G., Gorel P., Gros M., Gros P., Guillaudin O., (2022). Measurements of the ionization efficiency of protons in methane
European Physical Journal C, 82(12).
Chu M., Wu X., Rival D.E. (2022). Model-form uncertainty quantification of Reynolds-averaged Navier-Stokes modeling of flows over a SD7003 airfoil
Physics of Fluids, 34(11).
Contreras Raggio J.I., Arancibia C.T., Millán C., Ploeg H.-L., Aiyangar A., Vivanco J.F. (2022). Height-to-Diameter Ratio and Porosity Strongly Influence Bulk Compressive Mechanical Properties of 3D-Printed Polymer Scaffolds
Polymers, 14(22).
Ni Y., Topham R., Skippon T., Zhang J.-T., Hanlon S., Long F., Anghel C., Torres E., Daymond M.R., Béland L.K. (2023). Detection of zirconium hydrides in transmission electron micrographs using deep neural networks
Engineering Applications of Artificial Intelligence, 117.
Davies TC, Manzin J, Meraw M, Munro DS. (2022). Understanding the Development of a Design Thinking Mindset During a Biomedical Engineering Third-Year Course.
Biomed Eng Educ., 20, p.1-10.
Topping M., Changizian P., Feuerstake T., McDonald C., Long F., Guo R., Zhang J.T., Béland L.K., Daymond M.R. (2023). Design and implementation of an ion beam energy degrader for use in the study of nuclear materials
Journal of Nuclear Materials, 573.
Tu H., Green M.A., Marzanek M., Rival D.E. (2022). Experimental Investigation of Nonslender Delta-Wing Steadily Translating at Large Angles of Attack
AIAA Journal, 60(11), p.6483-6489.
Campigotto A., Campbell R.J., Lai Y. (2022). Correlation between corneal and contact lens deformation with changes in intraocular pressure for wearable monitoring systems
Eye (Basingstoke).
Zhang Y., Oestreicher J., Binns W.J., Briggs S., Kim C.S., Béland L.K. (2022). A Coarse-Grained Interaction Model for Sodium Dominant Montmorillonite
Langmuir.
Torkan, L. F., Bryant, J. T., Bicknell, R. T., and Ploeg, H. (2022). Accuracy of an Apparatus for Measuring Glenoid Baseplate Micromotion in Reverse Shoulder Arthroplasty.
ASME. J. Med. Devices, 16(4).
Ishan Chawla, P. M. Pathak, Leila Notash, A. K. Samantaray, Qingguo Li, U. K. Sharma (2023). Inverse and Forward Kineto-Static Solution of a Large-Scale Cable-Driven Parallel Robot using Neural Networks
Mechanism and Machine Theory, 179.
Salandari-Rabori A., Diak B.J., Fallah V. (2022). Dislocation-obstacle interaction evolution in rate dependent plasticity of AlSi10Mg as-built microstructure by laser powder bed fusion
Materials Science and Engineering A, 857.
Takahashi, Kota Z., Rebecca L. Krupenevich, Amy L. Lenz, Luke A. Kelly, Michael J. Rainbow, and Jason R. Franz (2022). Mechanics and Energetics of Human Feet: A Contemporary Perspective for Understanding Mobility Impairments in Older Adults
Biomechanics 2, 4, p. 494-499.
Jandaghi M.R., Pouraliakbar H., Fallah V., Ghassemali E., Saboori A., Pavese M. (2022). Additive manufacturing of nano-oxide decorated AlSi10Mg composites: A comparative study on Gd2O3 and Er2O3 additions
Materials Characterization, 192.
Krsikapa D., Jalayer S., Dossett W., Lee Y.M., Ko K.U., Huh M.Y., Choi B.H., Ku J.W., Lee K.C., Kim I.Y. (2022). Parts Consolidation of Automotive Front Crossmember: From Two-Piece CFRP Design to One-Piece Design
SAE Technical Papers.
Pan C., Sun H., Zhu X., Zhao J., Wang X., Liu Y. (2022). Vented ethanol-gasoline vapor explosions initiated by two symmetric sparks in a channel
Fuel, 329.
Massah J., Nomanfar P., Dehghani-Soufi M., Asefpour Vakilian K. (2022). Electrical properties measurement: A nondestructive method to determine the quality of bread doughs during fermentation
Journal of Cereal Science, 107.
Crispo L., Dossett W., McKenzie A., Kim I.Y. (2022). Free-Size Optimization of a Stiffened Panel Using Equivalent Radiated Power
AIAA AVIATION 2022 Forum.
Ambrogi F., Piomelli U., Rival D.E. (2022). Characterization of unsteady separation in a turbulent boundary layer: mean and phase-averaged flow
Journal of Fluid Mechanics, 945.
Aulakh D.J.S., Beale S.B., Pharoah J.G. (2022). A generalized framework for unsupervised learning and data recovery in computational fluid dynamics using discretized loss functions
Physics of Fluids, 34(7).
Henein H., Bogno A.-A., Yin S., Natzke P., Gallerneault M. (2022). On the role of Sc in powders and spray deposits of hypoeutectic Al-Cu: À propos du rôle de Sc dans les poudres et les revêtements par projection d’Al-Cu hypoeutectique
Canadian Metallurgical Quarterly.
Soukup J.W., Hetzel S.J., Stone D.S., Eriten M., Ploeg H.-L., Henak C.R. (2022). Structure-function relationships in dog dentin
Journal of Biomechanics, 141.
Mohammadi A., Daymond M.R., Docoslis A. (2022). New insights into the structure and chemical reduction of graphene oxide membranes for use in isotopic water separations
Journal of Membrane Science, 659.
Volino R.J., Devenport W.J., Piomelli U. (2022). Questions on the effects of roughness and its analysis in non-equilibrium flows
Journal of Turbulence.
Sun H., Ferasat K., Nowak P., Gravelle L., Gaffran N., Anderson C., Sirola T., Pintar O., Lievers W.B., Kim I.Y., Pilkey K., Béland L.K. (2022). Implementing a non-local lattice particle method in the open-source large-scale atomic/molecular massively parallel simulator
Modelling and Simulation in Materials Science and Engineering, 30(5).
Rudy S., Fan D., Ferrandis J.D.A., Sapsis T.P., Triantafyllou M.S. (2022). Optimized parametric hydrodynamic databases provide accurate response predictions and describe the physics of vortex-induced vibrations
Journal of Fluids and Structures, 112.
Dai C., Saidi P., Langelier B., Wang Q., Judge C.D., Daymond M.R., Mattucci M. (2022). Radiation-induced segregation on dislocation loops in austenitic Fe-Cr-Ni alloys
Physical Review Materials, 6(5).
Salandari Rabori A., Fallah V. (2022). Room temperature strain rate sensitivity of as-built 3D printed AlSi10Mg by laser powder bed fusion
Materials Letters, 320.
Wang Z., Yu M., Yang C., Long X., Gao N., Yao Z., Dong L., Wang X. (2022). Effect of Radiation Defects on Thermo–Mechanical Properties of UO2 Investigated by Molecular Dynamics Method
Metals, 12(5).
Dai C., Wang Q., Saidi P., Langelier B., Judge C.D., Daymond M.R., Mattucci M.A. (2022). Atomistic structure and thermal stability of dislocation loops, stacking fault tetrahedra, and voids in face-centered cubic Fe
Journal of Nuclear Materials, 563.
Wang Q., Judge C.D., Howard C., Mattucci M., Rajakumar H., Skippon T., Daymond M.R., Bickel G. (2022). Characterization of microstructure and microhardness of Neutron irradiated Inconel X-750
Journal of Nuclear Materials, 563.
Topping M., Long F., Cherubin I., Badr N.N., Cui J., Park J.S., Daymond M.R. (2022). Investigating the stability of reoriented hydrides and their reprecipitation using in-situ heating experiments
Journal of Nuclear Materials, 564.
Fathy J., Lai Y. (2022). A V-Shaped Microcantilever Sensor Based on a Gap Method for Real-Time Detection of E. coli Bacteria
Biosensors, 12(4).
Chen, L; Wang, ZY; Zhu, HL; Burr, PA; Qu, JT; Huang, Y; Balogh, L; Preuss, M; Muransky, O (2022). On the microstructure and high-temperature stability of nano-grained Zircaloy-4
SCRIPTA MATERIALIA, 210.
Sun, MQ; Wowk, D; Mechefske, C; Alexander, E; Kim, IY (2022). Surface and honeycomb core damage in adhesively bonded aluminum sandwich panels subjected to low-velocity impact
COMPOSITES PART B-ENGINEERING, 230.